Mini sledilnik gl300 spy tracker Exclusive vodoodporen žepen, javlja stanje baterije

April 06, 2018

Ok, first what you need to set is SIM card: APN, User name and PASS.
As example I wrote: izimobil, izimobil, izimobil
here:
Command:
AT+GTBSI=gl300,izimobil,izimobil,izimobil,,,,,FFFF$

Now set, “report mode”, APN, user name and pass must be written automatically, then IP and Port
Command:
AT+GTQSS=gl300,izimobil,izimobil,izimobil,3,,1,193.193.165.166,20706,192.0.0.0,0,,0,0,,,FFFF$

Also its important to set “Fixed report information” I done as example “Fixed time report” check every 30 sec, and send every 60 sec.
Command:
AT+GTFRI=gl300,1,0,,,0000,0000,30,60,60,60,0,1000,1000,0,5,50,1,0,0,FFFF$

These are most imporant steps to make start work GL300.

Please open manage tool you have from us and generate these commands by your self, after its set, you copy command from line and send SMS to GL300.

Please make sure that SIM card PIN is disabled and that your SIM card supports SMS.

Other important steps is create unit in GPS-trace platform, write IMEI and set that device is GL300.

Kind regards,

AT+GTNMD=gl300,1,2,3,2,300,300,2,3,0,0,,,,FFFF$

AT+GTFRI=gl300,,,,,,,,,,,,,,,,,,20,,FFFF$




  • Share:

You Might Also Like

0 comments